Ford Edge Maintenance Schedule

Preventative maintenance is one of the main keys to a long-lasting, high-functioning vehicle. If you recently purchased a new Ford Edge, following its maintenance schedule is strongly suggested. So, what is the Ford Edge recommended maintenance schedule? Review the Ford Edge service intervals with Cook County Ford today. If it’s time to schedule maintenance, our service department is here for you. Don’t miss out on your next Ford Edge oil change interval! 

Ford Edge Recommended Maintenance Schedule

As with other vehicle maintenance schedules, the Ford Edge recommended maintenance schedule is broken down into mileage intervals. We start at 10,000 miles and go from there to help your Ford Edge stay on roads in Valdosta and the surrounding areas. Check out the Ford Edge service intervals below, including the Ford Edge oil change intervals: 

10,000 Miles

• Inspect brake pads, shoes, rotors, drums, brake linings, hoses, and parking brake
• Inspect exhaust system and heat shields
• Inspect half-shaft boots
• Inspect rear axle and U-joints – lubricate if equipped with grease fittings
• Inspect steering linkage, ball joints, suspension, tie-rod ends, drive shaft, and U-joints – lubricate if equipped with grease fittings
• Inspect the automatic transmission fluid level (if equipped with a dipstick) – consult your dealer for requirements
• Inspect the wheels and related components for abnormal noise, wear, looseness, or drag
• Inspect tires and check tire pressures
• Perform multi-point inspection
• Rotate the tires, inspect tire wear, and measure tread depth

20,000 Miles

• Replace cabin air filter, if equipped
• Inspect brake pads, shoes, rotors, drums, brake linings, hoses, and parking brake
• Inspect exhaust system and heat shields
• Inspect half-shaft boots
• Inspect rear axle and U-joints – lubricate if equipped with grease fittings
• Inspect steering linkage, ball joints, suspension, tie-rod ends, drive shaft, and U-joints – lubricate if equipped with grease fittings
• Inspect the automatic transmission fluid level (if equipped with a dipstick) – consult your dealer for requirements.
• Inspect the wheels and related components for abnormal noise, wear, looseness, or drag
• Inspect tires and check tire pressures
• Perform multi-point inspection
• Rotate the tires, inspect tire wear, and measure tread depth

30,000 Miles

• Replace engine air filter(s)
• Inspect brake pads, shoes, rotors, drums, brake linings, hoses, and parking brake
• Inspect exhaust system and heat shields
• Inspect half-shaft boots
• Inspect rear axle and U-joints – lubricate if equipped with grease fittings
• Inspect steering linkage, ball joints, suspension, tie-rod ends, drive shaft, and U-joints- – lubricate if equipped with grease fittings
• Inspect the automatic transmission fluid level (if equipped with a dipstick) – consult your dealer for requirements
• Inspect the wheels and related components for abnormal noise, wear, looseness, or drag
• Inspect tires and check tire pressures
• Perform multi-point inspection
• Rotate the tires, inspect tire wear, and measure tread depth

40,000 Miles

• Replace cabin air filter, if equipped
• Inspect brake pads, shoes, rotors, drums, brake linings, hoses, and parking brake
• Inspect exhaust system and heat shields
• Inspect half-shaft boots
• Inspect rear axle and U-joints – lubricate if equipped with grease fittings
• Inspect steering linkage, ball joints, suspension, tie-rod ends, drive shaft, and U-joints – lubricate if equipped with grease fittings
• Inspect the automatic transmission fluid level (if equipped with a dipstick) – consult your dealer for requirements
• Inspect the wheels and related components for abnormal noise, wear, looseness, or drag
• Inspect tires and check tire pressures
• Perform multi-point inspection
• Rotate the tires, inspect tire wear, and measure tread depth

60,000 Miles

• Replace engine air filter(s)
• Replace cabin air filter, if equipped
• Inspect brake pads, shoes, rotors, drums, brake linings, hoses, and parking brake
• Inspect exhaust system and heat shields
• Inspect half-shaft boots
• Inspect rear axle and U-joints – lubricate if equipped with grease fittings
• Inspect steering linkage, ball joints, suspension, tie-rod ends, drive shaft, and U-joints – lubricate if equipped with grease fittings
• Inspect the automatic transmission fluid level (if equipped with a dipstick) – consult your dealer for requirements
• Inspect the wheels and related components for abnormal noise, wear, looseness, or drag
• Inspect tires and check tire pressures
• Perform multi-point inspection
• Rotate the tires, inspect tire wear, and measure tread depth

80,000 Miles

• Replace cabin air filter, if equipped
• Inspect brake pads, shoes, rotors, drums, brake linings, hoses, and parking brake
• Inspect exhaust system and heat shields
• Inspect half-shaft boots
• Inspect rear axle and U-joints – lubricate if equipped with grease fittings
• Inspect steering linkage, ball joints, suspension, tie-rod ends, drive shaft, and U-joints – lubricate if equipped with grease fittings
• Inspect the automatic transmission fluid level (if equipped with a dipstick) – consult your dealer for requirements
• Inspect the wheels and related components for abnormal noise, wear, looseness, or drag
• Inspect tires and check tire pressures
• Perform multi-point inspection
• Rotate the tires, inspect tire wear, and measure tread depth

90,000 Miles 

• Replace engine air filter(s)
• Inspect brake pads, shoes, rotors, drums, brake linings, hoses, and parking brake
• Inspect exhaust system and heat shields
• Inspect half-shaft boots
• Inspect rear axle and U-joints – lubricate if equipped with grease fittings
• Inspect steering linkage, ball joints, suspension, tie-rod ends, drive shaft, and U-joints – lubricate if equipped with grease fittings
• Inspect the automatic transmission fluid level (if equipped with a dipstick) – Consult your dealer for requirements
• Inspect the wheels and related components for abnormal noise, wear, looseness, or drag
• Inspect tires and check tire pressures
• Perform multi-point inspection
• Rotate the tires, inspect tire wear, and measure tread depth

100,000 Miles 

• Replace spark plugs (4cyl.)
• Replace cabin air filter, if equipped
• Inspect accessory drive belt(s)
• Inspect brake pads, shoes, rotors, drums, brake linings, hoses, and parking brake
• Inspect exhaust system and heat shields
• Inspect half-shaft boots
• Inspect rear axle and U-joints – lubricate if equipped with grease fittings
• Inspect steering linkage, ball joints, suspension, tie-rod ends, drive shaft, and U-joints – lubricate if equipped with grease fittings
• Inspect the automatic transmission fluid level (if equipped with a dipstick) – consult your dealer for requirements
• Inspect the wheels and related components for abnormal noise, wear, looseness, or drag
• Inspect tires and check tire pressures
• Perform multi-point inspection
• Rotate the tires, inspect tire wear, and measure tread depth

Why Follow the Ford Edge Recommended Maintenance Schedule?

Keeping up with the Ford Edge service intervals provides invaluable peace of mind! The risk of issues like breakdowns on roads in Nashville lessens significantly when you schedule routine maintenance to identify issues. Any minor problem subsequently does not have the opportunity to become a huge, costly complication. 

Regular maintenance is also important in terms of resale value. If you want to sell your Ford Edge at any time, furnishing a detailed maintenance report helps you charge a higher resale price. Buyers generally want to know if used vehicles have been meticulously maintained! 

Schedule Ford Edge Maintenance Today

When your next Ford Edge oil change interval is near, our team is here to help! Call 229-285-8179 or contact us online today to make an appointment. For more maintenance reads, learn about how to change a tire and how to be fuel-efficient when driving!